Alignment Systems
XT Shaft alignment
Easy-Laser® XT770 Shaft
For solving measurement and alignment problems of all
kinds on most machine types.
• Measuring units with 2 axis dot laser
• 360Live feature allows for adjustment with units positioned at any angle around the shaft
• Check machine movement over time with the EasyTrend program*
• Continuous Sweep and Multipoint measurements
• Programs for Horizontal and Vertical/Flange mounted machines
• Programs for Machine trains (unlimited) and Cardan/Offset* mounted machines
• Program for Twist/Flatness measurement of the base
• 66' measurement distance
Easy-Laser® XT660 Shaft
With the XT660 you can deal with all the important
steps of machine setup and maintenance.
• Measuring units with 1 axis dot laser
• Continuous Sweep and Multipoint measurements
• Programs for Horizontal and Vertical/Flange mounted machines
• Program for Machine trains (3 machines)
• Program for Twist/Flatness measurement of the base
• 66' measurement distance
Easy-Laser® XT550 Shaft
The intrinsically safe, Ex/ATEX approved XT550 system
has the same functionality as XT660. The difference is
that it comes with a different display unit (ecom Tab-
Ex®) for use in potentially explosive areas.
Measuring units are approved according to:
• II 2 G, Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ +50°C
• Presafe 17 ATEX 10552X, IECEx PRE 17.0049X
Easy-Laser® XT440 Shaft
With functions for most maintenance needs.
• Measuring units with 1 axis line laser
• EasyTurn and 9–12–3 measurements
• Programs for Horizontal and Vertical/Flange mounted machines
• 33' measurement distance
XT Belt alignment
Easy-Laser® XT190 Belt Transmission Alignment
Digitally displays the parallel and angular misalignment “live”. Use it as an add-on to the XT770/XT660/XT440/E720/E710/E540 systems, or as a separate tool thanks to the built-in display. Or download the free XT Alignment app and use your iOS or Android phone/tablet as display device! Align to specified tolerances, then document the result as PDF.
XT Vibration measurement
Easy-Laser® XT280 VIB
Easy-to-use vibration analyzer that quickly diagnoses vibration level, unbalance, misalignment and looseness. The direct readout of 1x, 2x, 3x RPM, total level as well as bearing condition provides necessary information during installation and alignment. The XT280 connects to the XT Alignment app, making it possible to document the result as PDF, with photo and comments for each measurement point.
XT Thermal camera
Easy-Laser® XT11 + Thermal camera
The Easy-Laser XT11 Display unit has the option to add a thermal imaging (IR) camera along with the standard 13 MP digital camera. Shoot a thermal image before and after alignment and include with the documentation!
XT Geometric Kit
Easy-Laser® XT Geometric Kit
With this kit added to your XT770, you will be able to take flatness and straightness measurements with the highest reliability and precision. The kit includes the very versatile and long proven laser transmitter D22 (pictured) plus geo brackets. For more information, please ask your sales representative.
XT Dynamic measurements
Easy-Laser® XT DM-brackets
With the EasyTrend program for XT770 you can keep track of machine movement over time. For example you can check for thermal expansion and pipe strain issues. Requires optional DM-brackets.
Geometric measurement E-series
Easy-Laser® E915/E910 Flange
For flange flatness measurement. See the result as a true 3D image in the display unit directly after measuring. Evaluate the result easily with different calculation settings directly on site without having to stop to go to a PC with separate analysis programs. This makes production much more efficient.
Two Flange systems are available:
• Easy-Laser E915 with Spin Laser.
• Easy-Laser E910 with Swivel Laser.
Easy-Laser® E920 Geometric
This versatile system can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise. Displayed resolution is 0.05 mils [0.001 mm]. The system can provide full documentation, with direct generation of PDF reports, and database programs for PC. The laser transmitter is our well known big seller, the D22 with levelling table, strong magnetic feet, and a range of up to 130' [40 m].
Easy-Laser® E930 Extruder
The Extruder system E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be hydraulic pipes for example. The well-thought-out design of the system ensures that the measurement procedure is quick and accurate. Diameters down to 1.97" [50 mm] can be measured. The programs guide you through the measuring procedure, which speeds up the work.
Easy-Laser® E980 Sawmill
The Easy-Laser E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Saw blades, band wheels, reducers and steerings are aligned and positioned. It can be used equally well for circular saws and band saws.
Easy-Laser® E950 Bore Alignment
Easy-Laser E950 makes measuring and aligning bearings and bearing journals easier thanks to a wireless detector and versatile brackets.
- Measures both full bores and half bores
- Multipoint measurement
- Bore ovality measurement
- Calculate waviness (short and long) and best-fit
Available configurations:
- Easy-Laser E950-A and E950-C for diesel engines, compressors, gearboxes etc.
- Easy-Laser E950-B and E950-D for propeller shaft drive lines with sterntube.
Easy-Laser® E960 Turbine
Easy-Laser E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the wireless detector unit and measurement programs that guide you through the measurement process.
- Measures both full bores and half bores
- Multipoint measurement
- Bore ovality measurement
- Calculate waviness (short and long) and best-fit
Available configurations:
- Easy-Laser E960-A: Suitable for gas turbines and smaller steam turbines.
- Easy-Laser E960-B: Suitable for large turbines.
Easy-Laser® E970 Parallelism
For parallelism measurement of rolls and other objects in numerous applications. The E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long (66'+66' m). Also measures level, straightness and flatness on wire sections (suction boxes), flatness on bases and straightness on rolls.
- For parallelism measurement of most kind of objects
- Versatile system – also for flatness and level
Easy-Laser® E975 Roll alignment
Designed mainly for roll alignment. The system is well suited when just one or two rolls are to be replaced or adjusted at the same time. The E975 has an angle detector, and a digital precision level. Quick to set up on the machine!
- Keep the maintenance and service work in-house
- Even short stoppages can be utilized
- Easier to use than traditional methods